Bench-Top Dot Peen Part Marking System

Multi 4 B

The modular Multi 4's bench-top dot peen part marking configuration is ideal for precisely marking text, symbols and Data Matrix codes on very small, small and medium-sized components. This robust system is easy to adjust and quickly configure to mark single parts, short runs or mass production. Keyboard in all of the necessary data in just a few seconds, and store commonly used layouts in the controller's onboard memory.

  • Fully self-contained, bench-top marking solution with user-friendly software – no PC required
  • 4 marking window sizes available: Compact (1.96" x 2.36"), Standard (4.72" x 2.36"), Large (7.87" x 2.36") and Extra-Large (7.87" x 7.87")
  • XL marking head is ideal for large parts or tags and for marking multiple parts at once.
  • Up to 1,000 possible settings – mark text, logos, data matrix codes, barcodes, date codes, serial numbers and other special characters of varying heights and depths
  • Programmable character size
  • Deep marks on flat, round, irregular and rough surfaces
  • Patented Intelligent Driving Impact (IDI) technology creates consistent marks on uneven surfaces
  • Mark several characters per second
  • Tungsten carbide stylus with 90° sharpening angle (available with 60° and 120° angle)
  • Various positioning accessories available, including autosensing marking head (see data sheet PDF), electric Z-axis, rotary D-axis, manual tag fixture and automatic tag feeder
  • High-resolution color control unit with RS-232 serial ports and USB ports – 3 inputs / 4 outputs
  • Simple to operate – ready to use right out of the box
  • Optional battery kit for fully standalone operation
  • Combination bench and hand-held configuration also available

Complete system includes marking head in choice of sizes, Multi 4 control unit, cable (9.8 ft / 3m), control box power cable, unclutching screw, and screw-type Z-axis.

Marking WindowMarking Head
(L x W x H)
Weight
Multi.4-120
4.72" x 2.36"
(120 x 60mm)
8.6" x 5.7" x 8.9"9.0 lbs.
Multi.4-50
1.96" x 2.36"
(50 x 60mm)
5.7" x 5.7" x 8.9"8.37 lbs.
Multi.4-200
7.87" x 2.36"
(200 x 60mm)
11.6" x 5.7" x 8.9"11.0 lbs.
Multi.4-200 XL
7.87" x 7.87"
(200 x 200mm)
14.2" x 13.3" x 8.4"16.5 lbs.
  • Standard bench kit dimensions (L x W x H): 16.2" x 12.2" x 25.8" (412 x 310 x 656mm) – 39.7 lbs.
  • Control unit dimensions (L x W x H): 12" x 11.41" x 7.28" – 6.6 lbs.
  • Adjustable character height, depending on the marking zone size in 0.1mm steps (see data sheet)
  • Fonts: 5x7 and 9x13, continuous and custom (5 levels of dots concentration per character)
  • Memory: 40 MB – up to 20,000 files
  • Electrical power: 90 to 240 V
  • Power: 250 W
  • Frequency: 50 to 60 Hz
  • Operating temperature: 32°F to 115°F (0°C to 45°C)

Standards:

  • Machinery Directives: 2006/42/CE
  • Electromagnetic Compatibility: 2004/108/CE
  • Low-Voltage Directives: 2006/95/CE
  • FCC Directive: Chapter 15
  • Precise marking of very small to medium-sized parts
  • Software:
    • Logo marking: TechnoLOG
    • 2D Data Matrix code marking: TechnoMATRIX
    • Marking history and production follow-up: TechnoPROD
    • PC programming and file transfer: TechnoSAVE
    • Use with Windows operating system: TechnoWINDOWS
  • Automatic tag feeder
  • Tag fixture (manual)
  • Rotary D-axis
  • Autosense marking head and motorized Z-axis (see data sheet PDF)
  • Remote start pedal or box
  • Maintenance kit
  • 24 V Battery kit (for standalone operation)
  • Bar code readers
  • Reading and verifying systems for 2D data matrix codes

Request Information